note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: tr0131a doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number / ordering information 1 / SFT3303 __ __ __ screening 2 / __ = not screened tx = tx level txv = txv level s = s level lead bend 3 / __ = straight leads ub = up bend db = down bend package /111 = to-111 g = cerpack j = to-257 SFT3303 series 5 amp pnp high speed power transistor 120 volts features: ? bv ceo 250v typical ? fast switching ? high frequency ? high linear gain, low saturation voltage ? 200c operating temperature ? high current, high voltage version of the sdt3303 ? tx, txv, s-level screening available - consult factory. maximum ratings symbol value units collector ? base voltage v cbo 150 volts collector ? emitter voltage v ceo 120 volts emitter ? base voltage v ebo 6.0 volts continuous collector current i c 5 amps base current i b 1 amps total device dissipation @ t c = 25oc derate above 25oc p d 50 0.33 watts w/oc operating & storage temperature t j & t stg -65 to +200 oc maximum thermal resistance (junction to case) r 0jc 3.0 oc/w notes: * pulse test: pulse width = 300sec, duty cycle = 2% 1/ for ordering information, price, and availability, contact factory. 2/ screening based on mil-prf-19500. screening flows available on request. 3/ up and down bend configurations are available for ?j? (to-257) packages only. 4/ unless otherwise specified,all electrical characteristics @25oc. to-111 (/111) cerpack (g) to-257 (j)
note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: tr0131a doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SFT3303 series electrical characteristics 4/ symbol min typ max units collector ? emitter blocking voltage (i c = 10ma) bv ceo 120 250 ?? volts collector ? base sustaining voltage (i c = 200a) bv cbo 150 300 ?? volts emitter ? base sustaining voltage (i e = 200a) bv ebo 6 13 ?? volts collector cutoff current (v ce = 80v) (v ce = 80v, t c = 150c) i ceo1 i ceo2 ?? ?? 0.05 0.5 1 10 a ma collector cutoff current (v cb = 80v) (v cb = 80v, t c = 150c) i cbo1 i cbo2 ?? ?? 0.005 1 0.5 25 a emitter cutoff current (v eb = 6v) (v eb = 6v, t c = 150c) i ebo1 i ebo2 ?? ?? 0.001 1.0 1.0 a ma dc current gain * (i c = 2a, v ce = 5v) (i c = 200ma, v ce = 5v) h fe 40 - 100 85 - - collector-emitter saturation voltage * (i c = 2a, i b = 200ma) (i c = 5a, i b = 500ma) v ce (sat) ?? ?? 0.36 1.6 0.75 - volts base-emitter saturation voltage * (i c = 2a, i b = 200ma) (i c = 5.0 a, i b = 500ma) v be (sat) ?? ?? 0.98 1.27 - - volts current gain ? bandwidth product v ce = 5v, i c = 0.5a, f = 10mhz f t 30 80 ?? mhz output capacitance v cb = 10v, i e = 0, f = 1.0mhz c ob ?? 85 150 pf on time (v cc = 30 v, i c = 5.0 a, v be (off) = 3.7 v, i b1 = i b2 = 500 ma, r l = 6 ? ) t (on) ?? 40 - ns off time t (off) ?? 900 - ns notes: * pulse test: pulse width = 300sec, duty cycle = 2% 1/ for ordering information, price, and availability, contact factory. 2/ screening based on mil-prf-19500. screening flows available on request. 3/ up and down bend configurations are available for ?j? (to-257) packages only. 4/ unless otherwise specified,all el ectrical characteristics @25oc.
note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: tr0131a doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SFT3303 series case outline: to-111 (/111) note: pin 4 case (gnd) case outline: cerpack (g) case outline: to-257 (j) available part numbers: SFT3303/111 SFT3303g SFT3303j, SFT3303jub, SFT3303jdb pin assignment code function pin 1 pin 2 pin 3 - normal collector emitter base
|
